Penaudio's new Sara S
Having launched the flagship Sinfonia just two months ago, Penaudio developed a new version of its Sara floorstander called Sara S (Special). Like Sara, the 2.5-way/4-ohm Sara S is built around 6.5” drivers bridging the gap between 2-way monitors and 3-way floor standers. According to the manufacturer, the reflex loaded Sara S combines positive attributes of Sara with those of Cenya. The speaker is designed to play big, clean bass with the natural openness and liquidness of Cenya. Sara S matches the Sara in width and height but is 2” deeper giving the magnesium coned midrange/woofers more room to play.
The drivers: ¾” ferrofluid cooled textile dome tweeter (Seas), 2 x 160mm (6,5”) magnesium coned midrange/woofer, copper rings above and below T-shaped pole piece, radial reinforced rubber surround (Seas Excel); Cross-over
300, 4500Hz; Frequency range: anechoic responce +-3dB 45-28000Hz, in room 32-25000Hz; Sensitivity: 86dB/1m/2,83V; Nominal impedance: 4ohms.
Jorma Design wiring, WBT 0730.12 (Signature platinum) pole screws, SCR polypropylene capacitors, Graditech air-core inductors, aluminium reflex pipe, custom made finnish birch plywood veneer 22mm / 16mm solid plywood cabinet.